Computer science is the study and design of computer systems, networks, software, and computing techniques. It is a dynamic field with a growing impact on the world today.
The Computer Science BA program is intended to permit students to combine interest in an alternate area (in humanities, arts, the professions or even natural science) with computer science in order to gain skills that increase their desirability with employers. Burning Glass found that adding software development or computer programming skills permits graduates to gain a 30+% salary premium over those without.
Admission to the College of Engineering and Applied Science is based on an overall assessment of both academic and non-academic qualifications. The primary review factors for admission are the strength and quality of the high school curriculum, high school class percentile, grade point average, and the result of the ACT or SAT. Well-prepared freshman applicants will have four years of mathematics (including one-and-a-half years of algebra, one year of geometry, and one-half year of trigonometry) and four years of natural science (including biology, chemistry, and physics). The College also will consider non-academic qualifications such as leadership skills, diversity in personal background, work experience, motivation, and maturity.
Freshmen applicants will be considered for admission directly to the major or to intended status (Engineering-Intended or Computer Science-Intended). Admission directly to the major is selective.
Transfer student admission is based on an overall assessment of both academic and non-academic qualifications. For transfer applicants, the primary factors considered for admission are the grade point average on transferable courses and the level of curriculum completion. The College also will consider non-academic qualifications such as leadership skills, diversity in personal background, work experience, motivation, and maturity.
Transfer applicants will be considered for admission directly to the major or to intended status (Engineering-Intended or Computer Science-Intended).
Admission to the Major
Students admitted to Engineering-Intended or Computer Science-Intended may apply for major status with their academic advisor at the time they believe they meet the requirements. The program may impose major status as a prerequisite for courses numbered 200 or above.
- Complete first semester calculus with a C or better grade.
- Complete GER Oral and Written Communication Part A.
- Engineering majors must complete Chem 100 with a C or better grade (or satisfactory score on the placement test). Computer Science majors must complete CompSci 251 with a C or better grade.
- Obtain a minimum grade point as set by the major department. A 3.00 GPA guarantees admission to any CEAS major.
- Courses required by the major may be repeated only once. No more than two courses may be repeated.
Questions on admission to CEAS or choosing a major should be directed to the Office of Student Services, (414) 229-4667.
General Education Requirements (GERs)
UW-Milwaukee has General Education Requirements that must be met in order to earn a bachelor’s degree. Some of the requirements of the program may fulfill the campus GERs. Please review the requirements and consult with your academic advisor.
Computer Science Curriculum
Minimum Credit Hours Required: 120
The program requires one semester of calculus (see Mathematics requirements below) and also 34 credits of major course requirements (22 credits of fixed courses and 12 credits of electives within the major). In addition, a student must either complete (or have completed) a second major, or demonstrate two minor areas of concentration. The alternate major or minor areas of concentration must overlap no more than six credits total with major course requirements of this degree. Furthermore, at least fifteen credits of the major course requirements must be completed at UW-Milwaukee.
Choose one of the following:
|MATH 211||Survey in Calculus and Analytic Geometry||4|
|MATH 213||Calculus with Life Sciences Applications||4|
|MATH 221||Honors Calculus I||5|
|MATH 231||Calculus and Analytic Geometry I||4|
Major Course Requirements
Take all of the following "Core" courses:
|COMPSCI 150||Survey of Computer Science||3|
|COMPSCI 250||Introductory Computer Programming||3|
|COMPSCI 251||Intermediate Computer Programming||3|
|COMPSCI 315||Introduction to Computer Organization and Assembly Language Programming||3|
|COMPSCI 317||Discrete Information Structures||3|
|COMPSCI 351||Data Structures and Algorithms||3|
|COMPSCI 395||Social, Professional, and Ethical Issues||3|
|EAS 200||Professional Seminar||1|
Additionally, students must take twelve elective credits of COMPSCI courses numbered 300 or higher.
The COMPSCI 395 and EAS 200 courses may be substituted with similar courses. The department maintains a list of approved substitutes; this list is posted publicly. If the substitutes are used to satisfy the second major or the minor areas, the credits substituted count against the allowable six credits of overlap.
Minor Areas of Concentration
For the purposes of this degree program, a “minor area of concentration” can be any of the following:
- An Associate’s degree at UWM or another school;
- A declared UWM Minor;
- A declared UWM Certificate;
- At least fifteen credits of courses in a single curricular code (other than CompSci), of which at least six credits are at the 300-level or higher.
As described above, the two minor areas of concentration can overlap with the major course requirements by no more than six credits total.
Students must maintain an average GPA of at least 2.00 on all work attempted at the University and in all courses offered by the College. Students majoring in biomedical engineering, computer engineering, computer science, industrial engineering, and materials engineering must maintain an average GPA of at least 2.00 in all 300-level and above courses in the student's major department. Students majoring in civil engineering, electrical engineering, and mechanical engineering must maintain an average GPA of at least 2.50 in all 300-level and above courses in the major department. Transferable courses will be included as appropriate. Advancement to major status is required for graduation.
In order to provide maximum flexibility while preserving the institutional identity of a UWM degree, the College requires residence:
- during the last 30 credits, or
- during 45 of the last 60 credits, or
- during any 90 credits of a student’s undergraduate career.
At least 15 credits of advanced work in the major must be completed in residence at UWM.
A student who does not maintain continuous registration during the academic year and is re-admitted to the College must meet the program and graduation requirements in effect at the time of re-entry.
Degree and major requirements must be completed within 10 years of initial enrollment at UW-Milwaukee. Should students not complete the major within the 10-year time frame, the students will switch to the most current degree and major requirements. A new 10-year time frame would then begin.
Students wishing to major in more than one field can do so in two ways:
- Complete the requirements for more than one major before receiving a degree from the College. In this case, the degree will list both majors.
- Be admitted to the College as a second degree candidate (after earning a bachelor's degree in any field), providing University and College entrance requirements are met. Such a student must meet all undergraduate degree requirements in the College and present a minimum of 30 credits beyond the previous bachelor's degree.
Concurrent Registration at Other Institutions
CEAS students wishing to establish concurrent enrollment at another institution must obtain prior permission from their academic advisor.
Student Academic Appeals
Students may appeal an academic action to the Office of Student Services. An appeal is a request for an exception to an established policy or rule. The content of each appeal is carefully reviewed in order to reach a decision. Appeals should be submitted in writing to the Office of Student Services. The appeals committee considers individual cases concerning the degree requirements and other academic rules and regulations established by the College of Engineering and Applied Science faculty.
The College of Engineering and Applied Science has established written procedures for undergraduate student academic grievances. Copies of the grievance procedure are available in the Office of Student Services. As a first step, students must discuss the grievance with the faculty member or administrator as soon as possible to attempt to resolve the issue, but not later than 30 days after the action that prompted the grievance/appeal.
Computer Science and Engineering Programs
Detailed descriptions of the CEAS undergraduate programs are provided in this catalog. All courses are not offered every semester. A few technical elective courses may be offered only once every three to four semesters. In addition, since computer science and engineering curricula are continually evolving to keep current, students are encouraged to consult with their advisors to plan each semester's list of classes. Part-time students should always maintain a plan that looks ahead two to three semesters to avoid scheduling difficulties.
The curricula outlined in the pages are applicable to new students entering CEAS in fall 2016 or later. Students who enrolled in computer science or engineering programs prior to that date should consult with the appropriate previous editions of this catalog for information about their program requirements. As a general rule, when program changes occur, continuing students have the choice of continuing in their existing program or following the new requirements. Occasionally, a program change will be required of all students regardless of their date of matriculation, so long as it does not increase the total credits needed for graduation.
These program descriptions represent the minimum requirements for graduation from UWM in computer science or engineering. In all cases, it is important that students consult with their advisor before making course selections to avoid errors in programming.
The Office of Student Services in the College of Engineering and Applied Science, located in Room E386 of the Engineering and Mathematical Sciences Building, offers undergraduate students academic advising from professional advisors who are familiar with the curriculum, College requirements, and the special needs of engineering and computer science students. These advisors provide services such as freshman orientation, course selection, program planning, and credit transfer evaluation. Students are assigned to a permanent professional advisor as soon as they are accepted into the College, and are urged to confer with their advisor at least once each semester. Students also are assigned to a faculty advisor who provides technical expertise specific to the student's area of study.
We understand that it can be a delicate balance managing school, work, family, and active social lives. The College of Engineering and Applied Science advisors are here to help you achieve that balance.
You will be assigned a professional academic advisor upon being admitted to the College of Engineering & Applied Science. Your advisor will work with you throughout your undergraduate experience, providing guidance on:
- course registration,
- graduation planning,
- career preparation,
- and serving as a liaison to the many other resources available on our campus.
Advisors are also a great source of information on student organizations, tutoring and scholarship opportunities.
In addition to professional academic advisors, you will also have access to faculty advisors. These advisors can provide insights into the technical aspects of the engineering and computer science curricula while mentoring you as you define your professional goals.
Honors in the College of Engineering and Applied Science
Dean's Honor List
GPA of 3.500 or above, earned on a full-time student's GPA on 12 or more graded credits in a given semester.
Honors College Degree and Honors College Degree with Distinction
Granted to graduating seniors who complete Honors College requirements, as listed in the Honors College section of this site.
Students with a cumulative GPA of 3.500 or above, based on a minimum of 40 graded UWM credits earned prior to the final semester, will receive all-university commencement honors and be awarded the traditional gold cord at the December or May Honors Convocation. Please note that for honors calculation, the GPA is not rounded and is truncated at the third decimal (e.g., 3.499).
Earned on a minimum of 60 graded UWM credits: Cum Laude - 3.500 or above; Magna Cum Laude - 3.650 or above; Summa Cum Laude - 3.800 or above.
Joint Programs with Other Campuses
Qualified students may enroll in coordinated pre-engineering programs at UW-Green Bay, UW-Parkside, and UW-Waukesha for two years of pre-engineering coursework. These coordinated programs ensure equivalent coursework, appropriate advising, and early access to the Cooperative Education Program at UWM.
Dual Degree Programs
Qualified students may enroll in coordinated dual degree programs at Alverno College, Carroll University, UW-Eau Claire, UW-Green Bay, UW-La Crosse, UW-Oshkosh, UW-Stevens Point, UW-Whitewater and Wisconsin Lutheran College. Students in these programs will earn a bachelor's degree at both universities in five years. Students transfer to UWM after three years at the partner university. For more information, contact the Office of Student Services at (414) 229-4667.
Joint Programs with Wisconsin Technical Colleges
Gateway Technical College
An agreement with GTC allows those students having associate degrees in the Electrical Engineering - Technology the opportunity to be given credit for courses required in the UWM bachelor of science in engineering program. For more information, contact the Office of Student Services at (414) 229-4667.
Milwaukee Area Technical College
An agreement with MATC allows joint admission and enrollment at MATC and CEAS. Qualified students may take English, mathematics, chemistry, and general education courses at MATC. The program ensures equivalent coursework and appropriate advising. Students complete a bachelor of science degree in engineering or computer science at UWM.
Waukesha County Technical College
An agreement with WCTC allows those students having associate degrees in the Industrial Occupations Division at WCTC the opportunity to be given credit for courses required in the UWM bachelor of science in engineering or bachelor of science in computer science program. For more information, contact the Office of Student Services at (414) 229-4667.