The Master of Science in Engineering program is a flexible program designed to meet the needs of a wide variety of students. The program can be a stepping-stone on the way to further studies and the pursuit of advanced research, such as can be obtained by pursuing the PhD. Or the program can provide a pathway to professional advancement through greater technical knowledge and intellectual maturity. The student, with the help and approval of a major advisor, can choose from a wide range of courses from throughout the College of Engineering and Applied Science (CEAS), and where appropriate, from other schools and colleges.

Students entering the Master of Science in Engineering program must choose an area of concentration, from among the numerous choices offered. It is possible to complete the MS in Engineering without a concentration, but almost all students do complete one. The MS in Engineering program currently offers the following areas of concentration:

  • Biomedical Engineering
  • Civil Engineering
  • Electrical and Computer Engineering
  • Energy Engineering
  • Engineering Management (admission to this concentration is suspended)
  • Engineering Mechanics
  • Industrial and Systems Engineering
  • Manufacturing Engineering
  • Materials Engineering
  • Mechanical Engineering
  • Occupational Biomechanics/Ergonomics

Admission Requirements 

Application Deadlines

Application deadlines vary by program, please review the application deadline chart for specific programs. Other important dates and deadlines can be found by using the One Stop calendars.

Admission

An applicant must meet Graduate School requirements plus these College requirements to be considered for admission to the program:

  1. Undergraduate major in engineering, mathematics or a natural science.
  2. Submission of official GRE scores from a test taken within the last 5 years.

Applicants may be admitted with specific program-defined course deficiencies provided that the deficiencies amount to no more than two courses. The student is expected to satisfy deficiency requirements within three enrolled semesters. The deficiencies are monitored by the individual graduate program unit. No course credits earned in making up deficiencies may be counted as program credits required for the degree.

Credits and Courses

Minimum degree requirements are 30 credits for the thesis option and 31 credits for the non-thesis option as outlined below. Of the courses offered in the College only those numbered 400 and above may be taken for graduate credit for this degree. Independent study courses (699 and 999) may be included in the minimum course credit requirements provided approval of a program of study including them has been obtained prior to registration in such courses. Typically, no more than three credits of independent study are allowed in the MS Program. Guidelines on acceptable independent study courses are available in the CEAS Graduate Programs Office. A student may not use courses that formed part of the requirements of a baccalaureate degree for subsequent graduate credit, except when those courses were part of CEAS Integrated BS/MS program.

Thesis and Non-Thesis Options

Students will be required to either the Thesis or Non-Thesis option in their program of study.  If the student chooses the Non-Thesis option, then as permitted by the student's department, the student must also choose between two methods of final evaluation: the Capstone Option and the Comprehensive Examination Option.

After 12 credits of coursework are completed, changes from Thesis to Non-Thesis option will not be allowed, except under exceptional circumstances to be considered on a case-by-case basis. Students may always change from a Non-Thesis to a Thesis option. Departments and faculty may make pursuing the Thesis option a requirement (or preference) of employment for TA’s , RA’s, and PA’s.

Thesis Option

All students are encouraged to undertake the thesis option. The degree requires the following:

Select a minimum of 12 credits in an approved technical program of studies12
Select 9 credits of approved electives9
Select 3 credits CEAS Graduate Seminar (Offered by each department and numbered 700)3
Select 6 credits of thesis6
Total Credits30

At least 12 credits, not including thesis or the CEAS Graduate Seminar Course, must be in courses of 700 level or higher. At least 12 credits, including thesis, must be earned at UWM. The thesis may be written in absentia provided prior permission has been obtained from the major professor and the Associate Dean for Academic Affairs in the College of Engineering & Applied Science. Students in the thesis option must pass a final comprehensive examination, administered by the Master’s Program Committee, partially in defense of the thesis.

Non-Thesis Capstone Option

Select a minimum of 18 credits in an approved technical program of studies18
Select 9 credits of approved electives9
Select 1 credits CEAS Graduate Seminar (Offered by each department and numbered 700)1
Select 3 credits of a capstone project, using a 3 credit course that allows flexible independent study (either the Independent Study course or a specific capstone course)3
Total Credits31

In addition to the requirements listed in the table above, at least 15 credits must be of 700 level or above.

For the capstone project, the student must submit a written proposal and receive approval from the advisor. The capstone project should be designed with the intent of leading to creative work based on the student’s background, and should be the equivalent of 3 credits of work to be completed over a single semester. Upon completion of the capstone, the student must submit a written report and give an oral presentation of the project to the Master’s Program Committee for approval.

Non-Thesis Comprehensive Examination Option

Select a minimum of 21 credits in an approved technical program of studies21
Select 9 credits of approved electives9
Select 1 credits CEAS Graduate Seminar (Offered by each department and numbered 700)1
Total Credits31

In addition to the requirements listed in the table above, at least 15 credits must be of 700 level or above.

Mastery of the courses taken in the program of study may be demonstrated by one of the following:

  1. The student submits a dossier of work, and passes an oral examination given by the Master’s Program Committee. Or
  2. The student passes a written master’s comprehensive examination when it is offered by the department.

Departments allowing a written examination option will offer such exams at least once per semester, and will announce the date of the exam at least 60 days prior to the exam. The department also must provide a written description of the topics covered on the exam, including text books and chapters.

Occupational Biomechanics/Ergonomics Concentration

  • Students must complete at least 6 credits of qualifying courses from Group A.
  • Thesis option students must complete at least 18 credits combined of qualifying courses from Group A and Group B.
  • Non-thesis option students must complete at least 24 credits combined from Group A and Group B.
  • Students must complete at least 2, but no more than 3 credits, of INDENG 880.
  • Any remaining credits in the MS in Engineering program of study may be taken as free electives.
Qualifying Courses
Group A
IND ENG 580Ergonomics3
IND ENG 590/890Topics in Industrial and Systems Engineering:1-3
OCCTHPY 625Design and Disability3
Group B
IND ENG 880Bioengineering Seminar1
IND ENG 575Design of Experiments3
IND ENG 582Ergonomic Job Evaluation Techniques3
KIN 520Introduction to Biomechanics Research3
IND ENG 780Advanced Ergonomics - Low Back Pain3
IND ENG 783Advanced Ergonomics - Upper Extremity3
IND ENG 716Engineering Statistical Analysis3
IND ENG 890Advanced Topics in Industrial and Systems Engineering: *1-3
MATLENG 710Advanced Mechanical Behavior of Materials3
PH 711Intermediate Biostatistics3
PH 759Intro to Regression for Understanding the SDOH3
PH 777Quantitative Research Methods for PH Policy & Administration3
KIN 720Advanced Biomechanics Research 3
KIN 725Interdisciplinary Themes in Biomechanics3

Additional Requirements

Major Professor as Advisor

The Graduate School requires that the student have a major professor to advise, supervise, and approve the Program of Study before registering for courses. The College will assign the incoming student to an initial advisor at the time of admission. A student may change advisors with the consent of the new advisor, approval by the Associate Dean for Academic Affairs, and upon notification of the student's current advisor.

Program of Study

During the first semester the student, in consultation with the major professor, develops a program of study, obtains the consent of the advisor and submits it to the CEAS Graduate Programs Office for approval by the Associate Dean. To make subsequent changes, the student must follow the same process. Graduation requires successful completion of courses from an approved program of study. Students are recommended to obtain approval for an amended program of study before taking a course not on the current program of study.

Master’s Program Committee

The Master's Program Committee is proposed by the major professor in consultation with the student. The Committee must include at least three graduate faculty, not all of whom are in the same department.

Time Limit

The student must complete all degree requirements within five years of initial enrollment.