The Master of Science in Engineering program is a flexible program designed to meet the needs of a wide variety of students. The program can be a stepping-stone on the way to further studies and the pursuit of advanced research, such as can be obtained by pursuing the PhD. Or the program can provide a pathway to professional advancement through greater technical knowledge and intellectual maturity. The student, with the help and approval of a major advisor, can choose from a wide range of courses from throughout the College of Engineering and Applied Science (CEAS), and where appropriate, from other schools and colleges.

Students entering the Master of Science in Engineering program must choose an area of concentration, from among the numerous choices offered. It is possible to complete the MS in Engineering without a concentration, but almost all students do complete one. The MS in Engineering program currently offers the following areas of concentration:

  • Biomedical Engineering
  • Civil Engineering
  • Electrical and Computer Engineering
  • Energy Engineering
  • Engineering Management (admission to this concentration is suspended)
  • Engineering Mechanics
  • Industrial and Systems Engineering
  • Manufacturing Engineering
  • Materials Engineering
  • Mechanical Engineering
  • Occupational Biomechanics/Ergonomics

Admission Requirements 

Application Deadlines

Application deadlines vary by program, please review the application deadline chart for specific programs. Other important dates and deadlines can be found by using the One Stop calendars.

Admission

An applicant must meet Graduate School requirements plus these College requirements to be considered for admission to the program:

  1. Undergraduate major in engineering, mathematics or a natural science.
  2. Submission of official GRE scores from a test taken within the last 5 years.
  3. Reason statement explaining reasons for graduate study, specific interests, and background.

Applicants may be admitted with specific program-defined course deficiencies provided that the deficiencies amount to no more than two courses. The student is expected to satisfy deficiency requirements within three enrolled semesters. The deficiencies are monitored by the individual graduate program unit. No course credits earned in making up deficiencies may be counted as program credits required for the degree.

Credits and Courses

Minimum degree requirements are 30 credits for the thesis option and 31 credits for the non-thesis option as outlined below. Of the courses offered in the College only those numbered 400 and above may be taken for graduate credit for this degree. Independent study courses (699 and 999) may be included in the minimum course credit requirements provided approval of a program of study including them has been obtained prior to registration in such courses. Typically, no more than three credits of independent study are allowed in the MS Program. Guidelines on acceptable independent study courses are available in the CEAS Graduate Programs Office. A student may not use courses that formed part of the requirements of a baccalaureate degree for subsequent graduate credit, except when those courses were part of the CEAS Integrated BS/MS program.

Thesis and Non-Thesis Options

Students will be required to either the Thesis or Non-Thesis option in their program of study. If the student chooses the Non-Thesis option, then as permitted by the student's department, the student must also choose between two methods of final evaluation: the Capstone Option and the Comprehensive Examination Option.

After 12 credits of coursework are completed, changes from Thesis to Non-Thesis option will not be allowed, except under exceptional circumstances to be considered on a case-by-case basis. Students may always change from a Non-Thesis to a Thesis option. Departments and faculty may make pursuing the Thesis option a requirement (or preference) of employment for TAs , RAs, and PAs.

Thesis Option

All students are encouraged to undertake the thesis option. The degree requires the following:

Select a minimum of 12 credits in an approved technical program of studies12
Select 9 credits of approved electives9
EAS 701Effective Academic Writing1
EAS 702Preparing Future Engineering Faculty & Professionals2
Select 6 credits of thesis6
Total Credits30

At least 12 credits, not including thesis or the CEAS Graduate Seminar Course, must be in courses of 700 level or higher. At least 12 credits, including thesis, must be earned at UWM. The thesis may be written in absentia provided prior permission has been obtained from the major professor and the Associate Dean for Academic Affairs in the College of Engineering & Applied Science. Students in the thesis option must pass a final comprehensive examination, administered by the Master’s Program Committee, partially in defense of the thesis.

Non-Thesis Capstone Option

Select a minimum of 18 credits in an approved technical program of studies18
Select 9 credits of approved electives9
EAS 701Effective Academic Writing1
Select 3 credits of a capstone project, using a 3 credit course that allows flexible independent study (either the Independent Study course or a specific capstone course)3
Total Credits31

In addition to the requirements listed in the table above, at least 15 credits must be of 700 level or above.

For the capstone project, the student must submit a written proposal and receive approval from the advisor. The capstone project should be designed with the intent of leading to creative work based on the student’s background, and should be the equivalent of 3 credits of work to be completed over a single semester. Upon completion of the capstone, the student must submit a written report and give an oral presentation of the project to the Master’s Program Committee for approval.

Non-Thesis Comprehensive Examination Option

Select a minimum of 21 credits in an approved technical program of studies21
Select 9 credits of approved electives9
EAS 701Effective Academic Writing1
Total Credits31

In addition to the requirements listed in the table above, at least 15 credits must be of 700 level or above.

Mastery of the courses taken in the program of study may be demonstrated by one of the following:

  1. The student submits a dossier of work, and passes an oral examination given by the Master’s Program Committee; or
  2. The student passes a written master’s comprehensive examination when it is offered by the department.

Departments allowing a written examination option will offer such exams at least once per semester, and will announce the date of the exam at least 60 days prior to the exam. The department also must provide a written description of the topics covered on the exam, including text books and chapters.

Energy Engineering Concentration

A minimum of 15 credits of qualifying graduate courses in Electrical Engineering or Mechanical Engineering.

Qualifying Courses
MECHENG 425Aerodynamics of Wind Turbines3
MECHENG 432Internal Combustion Engines3
MECHENG 434Air Conditioning System Design3
MECHENG 435Power Plant Theory and Design3
MECHENG 436Solar Engineering3
ELECENG 471Electric Power Systems3
ELECENG/MECHENG 4723
ELECENG 572Power Electronics3
ELECENG/MECHENG 574Intermediate Control Systems3
ELECENG 575Analysis of Electric Machines and Motor Drives3
ELECENG/MECHENG 701Advanced Linear System Analysis3
MECHENG 702Advanced Engineering Thermodynamics3
MECHENG 710Advanced Transport Processes2
MECHENG 711Thermal Radiation and Conduction3
MECHENG 712Convection Heat and Mass Transfer3
ELECENG/MECHENG 718Nonlinear Control Systems3
MECHENG 721Fundamentals of Fluid Flow3
MECHENG 722Advanced Fluid Mechanics3
MECHENG 723Computational Fluid Dynamics and Heat Transfer3
MECHENG 725Fluid Power and Turbomachinery2
ELECENG/MECHENG 819Adaptive Control Theory3

Additional Requirements

Major Professor as Advisor

The Graduate School requires that the student have a major professor to advise, supervise, and approve the Program of Study before registering for courses. The College will assign the incoming student to an initial advisor at the time of admission. A student may change advisors with the consent of the new advisor, approval by the Associate Dean for Academic Affairs, and upon notification of the student's current advisor.

Program of Study

During the first semester the student, in consultation with the major professor, develops a program of study, obtains the consent of the advisor and submits it to the CEAS Graduate Programs Office for approval by the Associate Dean. To make subsequent changes, the student must follow the same process. Graduation requires successful completion of courses from an approved program of study. Students are recommended to obtain approval for an amended program of study before taking a course not on the current program of study.

Master’s Program Committee

The Master's Program Committee is proposed by the major professor in consultation with the student. The Committee must include at least three graduate faculty, not all of whom are in the same department.

Time Limit

The student must complete all degree requirements within five years of initial enrollment.